Electric Over Hydraulic Crane with a 16,000 ft lb (2.2 ton-m) moment rating and a maximum lifting capacity of 4,000 lb (1,812 kg) at 4 ft (1.2 m)
- Proportional control of multiple functions simultaneously and independently
Adjust any function anytime to a different speed, for total control over the load
- Level sensors monitor the angle of the truck and crane with the NexStar FM remote system on a Titan crane body
Prevents operation in unsafe, unlevel conditions
- Automatic stop at 100% load capacity
Keeps people, equipment, and loads safer
- Adjustable speed settings; from 25% to 100%
Enables fine tuning of speeds for total control over the load
- The NexStar FM remote system receiver displays load-monitoring and diagnostic readouts in plain English
No codes to look-up or memorize; operator views precise percentage load capacity
- NexStar available with either tethered or fully-featured wireless remote options
Your choice for preferred control method
- Transmitter is IP66 rated and CE certified
Sealed and water protected for maximum durability
- 80 ft (24.3 m) of 5/16" (8 mm) aircraft quality cable
- Stowed Boom Length: 9' 10.5" (3 m) / 11' 11" (3.63 m)
- Extended Boom Length: Width: 1' 10" (.56 m)
- Width: 1' 10" (.56 m)
- Height: 2' 3" (.69 m)
- Base Plate Dimensions: 16.75" x 13.5" (.43 m x .34 m)
- Single Line Speed: 30 ft/min (9.17 m/min)
- 4.8 hp 12 volt DC hoist motor
- OSHA 1910.180
ANSI B30.5
- Requirements- Truck must be equipped with jackleg extending minimum 3' 9" (1.14 m) from centerline of truck. 8,800 GVWR minimum chassis requirement. (Does not include bodies and accessories). Battery Information: 575 amp cold cranking rating, 130 minute reserve capacity, maintenance type battery required for 12 volt DC operation. 70 amp minimum truck alternator required.
Write the First Review!