Electric Over Hydraulic Crane with a 10,000 ft lbs (1.38 ton-m) moment rating and a maximum lifting capacity of 3,200 lbs
- Proportional control of multiple functions simultaneously and independently. Adjust any function anytime to a different speed, for total control over the load.
- Level sensors monitor the angle of the truck and crane with the NexStar FM remote system on a Titan crane body. Prevents operation in unsafe, unlevel conditions.
- Automatic stop at 100% load capacity. Keeps people, equipment, and loads safer.
- Adjustable speed settings; from 25% to 100%. Enables fine tuning of speeds for total control over the load.
- The NexStar FM remote system receiver displays load-monitoring and diagnostic readouts in plain English. No codes to look-up or memorize; operator views precise percentage load capacity.
- NexStar available with either tethered or fully-featured wireless remote options. Your choice for preferred control method. Transmitter is IP66 rated and CE certified. Sealed and water protected for maximum durability.
- 62 ft (18.9 m) of 7/32" (6 mm) 5,600 lb (2540 kg) aircraft quality cable
- Stowed Boom Length: 7' 5" (2.26 m)
- Extended Boom Length: Width: 1' 8.63" (.52 m)
- Width: 1' 8.63" (.52 m)
- Height: 2' (.61 m)
- Base Plate Dimensions: 1' 1.5" x 1' 4.75" (.34 m x .43 m)
- Single Line Speed: 30 ft/min (9.17 m/min)
- 12 volt DC, series wound, 1.9 hp hoist motor
- OSHA 1910.180 ANSI B30.5
- Requirements- Truck must be equipped with jackleg extending minimum 3' 9" (1.14 m) from centerline of truck. 8,800 GVWR minimum chassis requirement. (Does not include bodies and accessories). Battery Information: 575 amp cold cranking rating, 130 minute reserve capacity, maintenance type battery required for 12 volt DC operation. 70 amp minimum truck alternator required.
Write the First Review!