DC Powered Crane with Maximum Capacity 2,000 Lbs. at 3.25 Ft. Load radius
- Maximum Capacity 2,000 Lbs. at 3.25 Ft. Load radius
- Planetary Gear Winch with 2.7 HP Permanent Magnet Motor: 2,000 lb. single line capacity
- Pedestal is eliminated, baseplate added for mounting on service body compartment top.
- On / Off 12 Volt Electric Remote Pendant Control 18 Ft. (removable)
- 62 Ft. of 1/4" wire rope w/ swivel hook (7,000 Lbs. Capacity Breaking Strength)
- Down haul pickle weight
- Includes ATB, needed when crane is used in construction as per 1926.1441(d)(2) & 1926.1416(d)(3)
- Power Rotation - Unlimited on a ball bearing slewing ring Boom Elevation - Full Power (0 Deg. To 75 Deg.)
- Boom Extension - Manual from 5.5 Ft. to 9 Ft.
- Overload Protection System
- Mounting plate is 12" square with a 9.5" square bolt pattern.
- OPTION: Add Mega Wireless Controls, Maintains the use of Standard Wired Pendant
- Included: Battery Power Cable #4 x 25 Ft. Circuit Breaker, 150 Amp. Ground Cable #4 x 3 Ft. for the factory battery to the truck frame. Master Disconnect Switch. Mounting Bolts Grade 8: 0.50" x 3.00" (Four). Recommended Installation Instructions. Owners Manual
- Requirements: Consistent 12 Volt DC power source with sufficient amperage while crane is running under load. Installer must assure the vehicle can maintain an appropriately level condition when the crane is in use under load. Boom Rest (P.N. 27860 for service body or P.N. 22158 for flat bed)
- Recommended: A dedicated battery, Group 31, deep cycle, near the crane is advised. Jackstand to prevent unrestricted twisting of chassis while lifting load Minimum Recommended Vehicle GVWR 8,600 lbs.
Write the First Review!