Liftmoore DC Powered Crane: 206REL W Series (206RELW VH ATB)

(0) Reviews: Write first review

SKU: LIFT:206RELW VH ATB

DC Powered Crane with 6,500 ft.-lb. moment rating and 2,000 lb. max capacity

Please Call for Availability

800.877.0338

Description

DC Powered Crane with Maximum Capacity 2,000 Lbs. at 3.25 Ft. Load radius

Maximum Capacity 2,000 Lbs. at 3.25 Ft. Load radius
Planetary Gear Winch with 2.7 HP Permanent Magnet Motor: 2,000 lb. single line capacity
Lower Pedestal Height standard at 22.75" - can be variable height
On / Off 12 Volt Electric Remote Pendant Control 18 Ft. (removable)
62 Ft. of 1/4" wire rope w/ swivel hook (7,000 Lbs. Capacity Breaking Strength)
Down haul pickle weight
Includes ATB, needed when crane is used in construction as per 1926.1441(d)(2) & 1926.1416(d)(3)
Power Rotation - Unlimited on a ball bearing slewing ring Boom Elevation - Full Power (0 Deg. To 75 Deg.)
Boom Extension - Manual from 5.5 Ft. to 9 Ft.
Overload Protection System
Mounting plate is 12" square with a 9.5" square bolt pattern.
Included: Battery Power Cable #4 x 25 Ft. Circuit Breaker, 150 Amp. Ground Cable #4 x 3 Ft. for the factory battery to the truck frame. Master Disconnect Switch. Mounting Bolts Grade 8: 0.50" x 3.00" (Four). Recommended Installation Instructions. Owners Manual
Requirements: Consistent 12 Volt DC power source with sufficient amperage while crane is running under load. Installer must assure the vehicle can maintain an appropriately level condition when the crane is in use under load. Boom Rest (P.N. 27860 for service body or P.N. 22158 for flat bed)
Recommended: A dedicated battery, Group 31, deep cycle, near the crane is advised. Jackstand to prevent unrestricted twisting of chassis while lifting load Minimum Recommended Vehicle GVWR 8,600 lbs.

Write the First Review!

You must login to post a review.

Email
Password
New Customer Forgot Password