Liftmoore DC Powered Crane: 206REL Series (206RELS ATB)

(0) Reviews: Write first review

SKU: LIFT:206RELS ATB

DC Powered Crane with 6,500 ft.-lb. moment rating and 2,000 lb. max capacity

Please Call for Availability

800.877.0338

Description

DC Powered Crane with Maximum Capacity 2,000 Lbs. at 3.25 Ft. Load radius

Maximum Capacity 2,000 Lbs. at 3.25 Ft. Load radius
Planetary Gear Winch with Permanent Magnet Motor
Pedestal is eliminated, baseplate added for mounting on service body compartment top.
On / Off 12 Volt Electric Remote Pendant Control 18 Ft. (removable)
Galvanized Aircraft Cable 3/16" x 35 Ft. (4,200 Lbs. Breaking Strength)
Travel Block w/ swivel hook for easy two part line hook up
Power Rotation - Unlimited on a ball bearing slewing ring Boom Elevation - Full Power (0 Deg. To 75 Deg.)
Boom Extension - Manual from 5.5 Ft. to 9 Ft.
Overload Protection System
Optional Anti-Two Block System, needed when used in construction as per OSHA 1926.1441(d)(2) & 1926.1416(d)(3)
Mounting plate is 12" square with a 9.5" square bolt pattern.
Included: Battery Power Cable #4 x 25 Ft. Circuit Breaker, 150 Amp. Ground Cable #4 x 3 Ft. for the factory battery to the truck frame. Master Disconnect Switch. Mounting Bolts Grade 8: 0.50" x 3.00" (Four). Recommended Installation Instructions. Owners Manual
Requirements: Consistent 12 Volt DC power source with sufficient amperage while crane is running under load. Installer must assure the vehicle can maintain an appropriately level condition when the crane is in use under load. Boom Rest (P.N. 27860 for service body or P.N. 22158 for flat bed)
Recommended: A dedicated battery, Group 31, deep cycle, near the crane is advised. Jackstand to prevent unrestricted twisting of chassis while lifting load. Minimum Recommended Vehicle GVWR 8,600 lbs.

Write the First Review!

You must login to post a review.

Email
Password
New Customer Forgot Password