Jerr-Dan 6 Ton Aluminum (6TA)

When you need to get the job done, count on Jerr-Dan 6 Ton Aluminum carriers. They are exceptionally engineered to be tough and reliable, with decks available in widths of 96″ and 102″, and in lengths of 19′, 20′ and 21′. Our aluminum decks are constructed of extruded floor planks and have 12,000 lb. capacities. Jerr-Dan’s No-Lube™ slide pads and pivot joints on the subframe drastically reduce maintenance costs over the life of the carrier. They also provide best-in-class workmanship, paint finish, and hose/harness tracking systems. With our exclusive patented Galvanized Steel Beam Technology™, you’ll get unparalleled strength compared to any aluminum carrier design in the industry

Features: 

• Lowest maintenance carrier in the world, including No-Lube (TM) technology for side pads and pivot joints
• Strongest aluminum beds in the industry featuring exclusive and patented Galvanized Steel Beam Technology (TM)
• On-board hydraulic pressure gauge allows for easy troubleshooting
• Single sheet decking on conventional & dual angle steel decks reduces weld joints & potential corrosion points
• Combination winch cable guide roller / tensioner plate
• Manual or air controlled winch free-spool
• Corrosion resistant lighted dual control stations
• Federal Motor Carrier Safety Administration DOT 393 compliant crash protection headboard
• Most advanced, high performance hose / wire cable-tracking system in the industry
• Highest standard DOT reflectivity and lighting levels in the industry
• 12 key-slots standard
• Available on a wide range of domestic & foreign chassis

Accessories: 

• Exclusive R.A.I.L. (TM) System (Rear Awareness Indicator Lights)
• Industry's strongest and most user-friendly SRS (TM) (Side Recovery System)
• Wireless remote with exclusive ARM (TM) (Actuated Remote Mechanism) system
• LED emergency lighting
• Multiple work light mounting locations
• 36", 48", 60" & 78" toolboxes, storage trays and baskets
• Automatic throttle-up on-demand (subject to chassis configuration)

• Length: 19', 20', 21'
• Capacity: 12,000 lbs
• Width: 96", 102"

• Style:

  • Convention or dual angle
  • Extruded 6061-T6 decking
  • Fixed or removable blade side rails

• Winch (worm gear):

  • 8,000 lbs.—3/8" x 56' wire rope
  • 10,000 lbs.—7/16" x 56' wire rope
• Lift Capacity: 3,000 lbs
• Tow Capacity: 7,500 lbs
• Maximum Extended Reach: 63"
• Ground Approach Angle: 4 Degrees

• Usable CA (Cable to Axle Centerline):

  • 120"-126" (19' deck)
  • 126"-138" (20' deck)
  • 138"-150" (21' deck)